Leave Your Message

Revealing the high-tech coating process behind the metal texture of car interiors! Ever Ray resin creates a triple protection system B

2025-07-18

In the field of vacuum electroplating primer, Ever Ray has proposed a breakthrough formula: difunctional polyurethane acrylate 13%; difunctional polycarbonate acrylic resin 12%; tetrafunctional polyester acrylate 13%; trifunctional monomer TMPTA 12%; polyether modified polydimethylsiloxane 0.1%; photosensitizer 3.5%; solvent 46.4%2.

This formula is cross-linked through photocuring polymerization, giving the UV-curing coating a smoother and fuller surface effect, good plating, strong interlayer adhesion, and excellent water resistance.

The test results show that the primer can meet Volkswagen's strict hydrolysis test requirements: after 72 hours of testing in a 90℃&95% RH hot and humid environment, the product surface condition is intact and the adhesion test is qualified.

The patent "A light-curing polymer resin material resistant to steel wool" applied by Ever Ray in November 2024 has pushed the performance of topcoat to a new height1. This technology uses modified silane coupling agents to chemically modify nano zirconium oxide, introduces multiple functional groups on the surface of nanoparticles, and significantly improves the comprehensive performance of resin products.

Full process of dual-curing process

The complete process of dual-curing vacuum plating coating for automotive interior parts includes multiple precise steps:

Surface treatment stage: First, clean, dust and dry the surface of the material to ensure the cleanliness of the substrate. Then remove static electricity to avoid defects in subsequent spraying.

Primer construction stage: Spray the vacuum electroplating primer directly on the surface of the plastic material (mainly PC, ABS, PC+ABS, etc.). After spraying, harden the primer by UV curing or low-temperature baking.

Vacuum coating stage: In a vacuum environment, magnetron sputtering or resistance evaporation technology is used to deposit metal atoms on the surface of the primer to form a metal coating. Modern equipment combines magnetron sputtering and vacuum evaporation technology to improve the quality and efficiency of the coating.

Midcoat and topcoat coating: Midcoat is sprayed on the metal coating to give it a color effect, and finally a wear-resistant topcoat is applied. After the topcoat is cured, a protective layer is formed to resist wear and corrosion in daily use.

Throughout the process, fixture design and workpiece rotation method are crucial to coating uniformity. Modern equipment uses a 6-axis/8-axis/9-axis orbital system, and variable frequency stepless speed regulation ensures uniform coating at all angles.

Market Prospects and Application Cases

The automotive interior vacuum plating market is ushering in a period of rapid growth. With the popularity of new energy vehicles, consumers' requirements for the sense of technology and luxury of interior decoration are constantly increasing. The vacuum plating process can add metal elements to the automotive interior, enhance the texture and taste, and create a modern sense of technology and luxury.

Ever Ray's products have been widely used in multiple parts of automotive interiors, including gear levers, steering wheel decorative rings, control panels, center console decorative parts, handbrake handles and shift levers, etc. These parts have obtained extremely high metal texture through vacuum plating, which improves driving comfort and overall visual effects.

After a well-known automobile brand adopted Ever Ray resin system, the scratch resistance of interior parts increased by 50%, and the service life was extended by more than three years. The brand's design director said: "The matte metal texture has become the iconic design language of our new energy vehicles."

Ever Ray has established long-term cooperative relations with universities such as Wuyi University School of Chemical Engineering and Jiangmen Vocational and Technical College, and established a research and development center in Jiangmen Health Research Institute to ensure that the company's products and technologies are always at the forefront of the UV radiation curing industry.

The company currently has 9 invention patents and has been recognized by the Guangdong Provincial Department of Industry as an "innovative small and medium-sized enterprise" and a "specialized and new small and medium-sized enterprise". These innovative achievements are driving the development of automotive interior coating technology towards a more environmentally friendly and higher performance direction.

图片2.jpg